Noise/Vibration Information - Bosch Professional GSR 18V-60 FC Manual Original

Cordless drill/driver
Recommended ambi-
ent temperature dur-
ing charging
Permitted ambient
temperature during
B)
operation and dur-
ing storage
Recommended bat-
teries
Recommended bat-
tery chargers
Data transmission
C)
Bluetooth®
Signal interval
D)
Signal range
A) Depends on battery in use
B) Limited performance at temperatures <0 °C
C) The mobile terminal devices must be compatible with Bluetooth® Low Energy devices (version 4.1) and support the Generic Access Profile
(GAP).
D) The signal range may vary greatly depending on external conditions, including the receiving device used. The Bluetooth® range may be signi-
ficantly weaker inside closed rooms and through metallic barriers (e.g. walls, shelving units, cases, etc.).

Noise/Vibration Information

Noise emission values determined according to EN 62841-2-1 for GFA 18-M, GFA 18-B, GFA 18-WB.
Noise emission values determined according to EN 62841-2-2 for GSR 18V-60 FC, GFA 18-W, GFA 18-E.
Typically, the A-weighted noise level of the power tool is
Sound pressure level dB(A)
Sound power level dB(A)
Uncertainty K dB
Wear hearing pro-
tection!
Vibration total values a (triax vector sum) and uncertainty K determined according to EN 62841-2-1 for GFA 18-M GFA 18-
h
B, GFA 18-WB:
Vibration total values a (triax vector sum) and uncertainty K determined according to EN 62841-2-2 for GSR 18V-60 FC
h
GFA 18-W, GFA 18-E:
Drilling into metal:
a m/s
h
K m/s
Screwdriving:
a m/s
h
K m/s
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
Bosch Power Tools
GSR 18V-60 FC GFA 18-M
°C 0 to +35
°C -20 to +50
GBA 18V...
ProCORE18V...
GAL 18...
GAX 18...
GAL 36...
Bluetooth® 4.1
(Low Energy)
8 s
Maximum 30 m
GSR 18V-60 FC GFA 18-M
75
86
5
2
–
2
–
2
< 2,5
2
1,5
GFA 18-B GFA 18-W
– – –
– – –
– – –
– – –
– – –
GFA 18-B GFA 18-W
75 75 74
86 86 85
5 5 5
< 2,5 < 2,5 –
1,5 1,5 –
– – < 2,5
– – 1,5
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
English | 9
GFA 18-E GFA 18-WB
– –
– –
– –
– –
– –
GFA 18-E GFA 18-WB
74 75
85 86
5 5
– < 2,5
– 1,5
< 2,5 –
1,5 –
1 609 92A 53M | (09.12.2019)