Inappropriate Use; Technical Description; Safety Instructions; Identification Of Safety Instructions - Walther PILOT TERRA Instrucciones De Servicio

equipment in accordance with ATEX are compliant with the necessary requirements.
The operator must provide corresponding safety measures for all applications in
which the breakdown of the equipment might lead to danger to persons.
If any irregularities are observed while the equipment is in operation, the equipment
must be put out of operation immediately and WALTHER Spritz- und Lackiersysteme
must be consulted.
Grounding / Equipotential Bonding
Measures must be taken to ensure that the spray gun is sufficiently grounded
(earthed) by means of a conductive air hose (maximum resistance 10
1.3

Inappropriate use

The spray gun can't be used for any application not included in the instructions. Any
other use is improper. Some sample of improper use:
• Spray in direction of people or animals
• Spray liquid nitrogen
2

Technical Description

PILOT TERRA:
PILOT TERRA-LVLP:
Model versions:
When pulling the trigger (N
material needle (N
order.
The material flow rate is dependent on the diameter of the nozzle and the adjustment
of the material pressure at the pressure tank or material pressure regulator. In addi-
tion, the material flow rate can be controlled by screwing the adjusting screw (N° 7)
in or out.
3

Safety instructions

3.1

Identification of safety instructions

Warning
The pictogram and the urgency level "Warning" identify a possible danger to
persons.
Possible consequences: Slight to severe injuries.
Attention
The pictogram and the urgency level "Attention" identify a possible danger to
material assets.
Possible consequences: Damage to material assets.
Manual spray gun for conventional atomisation
Manual spray gun vapour-reduced
• with gravity-feed cup
• with material connection
11) the valve cone opens first (N
o
3.3) is pulled back only after this. Closing takes place in reverse
o
25
Ω).
6
5.2) (pre-air) and the
o