Change To Profibus® Mode / Install - ProMinent DULCOMETER Manual Complementario

2
Change to PROFIBUS
Change to PROFIBUS
Operating mode [Bus-ON]
Details of operating mode "Bus-ON"
In [Bus-ON] operating mode, it is only possible to change the operating mode. The
settings from [Bus-OFF] operating mode are adopted when switching to operating
mode [Bus-ON]. By contrast, the settings made via the PROFIBUS
The settings are only valid for as long as the DMT remains in operating mode
[Bus-ON] and is connected to the PROFIBUS
Parameter Profibus
Mode: Bus-ON
Address: = 125
Fig. 3: Operating mode [Bus-ON]
Select operating mode
PROFIBUS
®
ð PROFIBUS
Changing the transmission rate
The transmission rate is limited to no
more than 1.5 Mbit/s.
The transmission rate is recognised auto‐
matically.
®
mode
®
[Bus-ON] , so that the DMT can be controlled over the
appears in the continuous display.
®
Change to PROFIBUS® mode / install
mode / install
®
Mode: Bus-ON
Address: = 125
Exiting PROFIBUS
Select operating mode
to exit PROFIBUS
ating mode
® are not saved.
A0895_EN
® mode
[Bus-OFF] ,
mode (oper‐
®
[Bus-ON] )
37