Product Specifications; Intended Use; Maintenance And Care - Würth master BS 12-A solid Manual Original

BS 12-A solid.book Seite 10 Donnerstag, 26. Februar 2009 3:24 15

Product Specifications

Battery-operated
Screw driving drill
Part number
Rated power
No-load speed
Speed I
Speed II
max. torque
Drill dia. Steel
Drill dia. Aluminium
Drill dia. Wood
Screw dia., (max.)
– Wood
– Steel
– Aluminium
Thread of work spindle
Weight approx. (without Battery)
Battery (SD) - NiCd
Part number
Rated Voltage
Weight approx.
Battery (SD) - Li-Ion
Part number
Rated Voltage
Weight approx.
Battery
Battery protection features
Wuerth 12 V lithium-ion batteries are designed with
features that protect the lithium-ion cells and maximize
battery life. Under some operating conditions, these
built-in features may cause the battery and the tool it is
powering to act differently from nickel-cadmium batter-
ies.
During some applications, the battery electronics may
signal the battery to shut down, and cause the tool to
stop running. To reset the battery and tool, release the
trigger and resume normal operation.
NOTE: To prevent further shut down of the battery,
avoid forcing the tool. Switching to a lower speed will
also prevent shut down.
If releasing the trigger does not reset the battery and
tool, the battery pack is depleted. If depleted, the bat-
tery pack will begin charging when placed on the lithi-
um ion charger.
10
Battery Charging
The battery is equipped with an NTC temperature con-
trol which allows charging only within a temperature
BS 12-A solid
range of between 0 °C and +50 °C. A long battery
service life is achieved in this manner.
0700 683 X
300 W
0–350 rpm
The cordless drill/screwdriver can be used for drilling
0–1350 rpm
wood, metal and plastics and also as a screw driver.
45 Nm
For damage caused by usage other then intended, the
13 mm
user is responsible.
16 mm
38 mm
M 8
Always remove battery before working on ma-
M 6
chine.
M 6
Always keep the machine and the ventilation slots
1/2" - 20 UNF
clean.
1.75 kg
If the machine should fail despite the care taken in man-
ufacturing and testing, repair should be carried out by
a Würth Master-Service agent.
0700 980 320
For all correspondence and spare parts orders, always
12 V
include the article number on the type plate of the ma-
0.76 kg chine.
For the current spare parts list of this machine, log into
the Internet under "http://www.wuerth.com/
partsmanager" or ask for a copy at your nearest Würth
0700 956 330
branch office.
12 V
0.5 kg
Power tools, accessories and packaging should be sort-
ed for environmental-friendly recycling.
corporation into national law, power tools that are no
longer suitable for use must be separately collected and
sent for recovery in an environmental-friendly manner.
Defective or worn out batteries must be recycled ac-
cording to the guidelines 91/157/EEC.

Intended Use

Maintenance and Care

Disposal
Only for EC countries:
Do not dispose of power tools into
household waste!
According to the European Directive
2002/96/EC on waste electrical
and electronic equipment and its in-