Care And Maintenance; Troubleshooting; Replacement Parts List - Kobalt KLDP1 Manual Del Usuario

CARE AND MAINTENANCE

 Wipe plastic parts clean using mild soap and warm water. Do not get moisture or water into
interior moving parts.

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE
Unit will not
start.

REPLACEMENT PARTS LIST

For replacement parts, call our customer service department at 1-888-3KOBALT, 8:00 a.m. – 8:00
p.m., ET, Monday – Friday.
PART
I Presta Valve Adaptor
J Sports Needle
K Raft Nozzle
1. Preset pressure setting may
be below the actual pressure
of the item you are inflating.
2. Cord not plugged in.
3. Circuit breaker is tripped.
4. Fuse in 12 Volt DC power
cord blown.
DESCRIPTION
CORRECTIVE ACTION
1. Adjust Preset pressure setting to
higher pressure.
2. Plug into a working 120 Volt AC
Outlet or 12 Volt DC Power Outlet.
3. Reset circuit breaker.
4. Replace 10 Amp fuse in 12 Volt DC
power cord.
7
Printed in China