Attaching Icsa To Stroller; Preparing Stroller For Icsa; Installing Icsa - Britax BOB SINGLE Instrucciones

ATTACHING ICSA TO STROLLER

PREPARING STROLLER FOR ICSA

Failure to attach ICSA
securely to stroller may result
in serious injury or death.
1. Prepare Stroller
Set parking brake, rotate canopy
towards handlebar (see stroller owner's
manual if necessary).
2. Unfasten Restraint Belt Buckle
Unfasten buckle of Restraint Belt and
place buckle ends to the
sides of stroller seat.
3. Slide Covers Down
Push to slide each Cover (at front of
stroller Accessory Adapters) down on
each side of stroller, exposing each
Receiver Socket.

INSTALLING ICSA

1. Install ICSA
Push ICSA Locking End Caps
straight into Receiver Sockets fully.
Listen for click or snap noise on each
side.
CLICK
2. Verify Proper Installation
Pull on center of ICSA Front Tube to
verify ICSA is securely locked into
place.
CLICK
10
P637000A