EAS ELECTRIC EMIH320-3F Manual De Instrucciones página 45

2. Place a suitable pan on the cooking zone that
you wish to use.
•
Make sure the bottom of the pan and the
surface of the cooking zone are clean and
dry.
3. Touching
control ,and a indicator next to the key will flash.
4. Select a heat setting by touching the "-" or
"+" control.
If you don't choose a heat setting within 1
•
minute, the Induction hob will automatically
switch off. You will need to start again at step
1.
You can modify the heat setting at any time
•
during cooking.
Warning:
The whole hob can take in charge a maximum power of 3000W.
Consequently, the hob automatically reduces the maximum output
power by allowing a maximum sum of the all power levels of 12
If the display flashes
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you're using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking
zone.
The display will automatically turn off after 1 minute if no suitable
pan is placed on it.
the heating
alternately with the heat setting
11
zone selection
V.2