EAS ELECTRIC EMIH320-3F Manual De Instrucciones página 59

Some buttons can't
work, or the LED
display is not normal.
The Cooking
Mode
Indicator
comes on,
but heating
does not
start.
Heating stops
suddenly during
operation and the
display flashes "u".
Heating zones of
the same side
(such as the first
and the second
zone) would
display u
Fan motor sounds
abnormal.
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers
and damages to the induction hob.
The display board
is damaged.
High
temperature
of the hob.
There is
something
wrong with the
fan.
The power board
is damaged.
Pan type is wrong
Pot diameter is
too small.
Cooker has
overheated;
Power board and
display board
connection failure
The display board
of communicate
part is damaged.
The main
board is
damaged.
The fan motor
is damaged.
25
Replace the
display board.
Ambient
temperature may
be too high. Air
Intake or Air Vent
may be blocked.
Check whether
the fan runs
smoothly；
if not, replace the
fan.
Replace the power
board.
Use the proper pot
(refer to the
instruction manual.)
Unit is overheated.
Wait for temperature
to return to normal.
Push ON/OF button
to restart the unit.
Check the
connection
Replace the
display board.
Replace the
power board.
Replace the
fan.
Pan
detection
circuit is
damaged,
replace the
power board.
V.2 V.2