Wolf RWT Suplemento Para La Instalación Y El Mantenimiento Unidades Manuales página 6

Advice
Details for the assembly can be taken from the enclosed self-explaining images:
drawing 1
detail P
drawing 2
6
Installation of
the heat wheel heat exchanger casing
The installation material for the assembly of the heat wheel heat exchanger is located
in the heat wheel heat exchanger casing, the connection material (screws and nuts)
to connect the air handling unit with the heat wheel heat exchanger is located in the
air handling unit.
Installation of the heat wheel heat exchanger casing
Position the casing bottom parts (pos. 1 and 2) on the designated place on the on-
site foundation
Put casing top parts (pos. 2) onto the casing bottom parts (pos. 1) and connect all
casing parts to each other using the attached connection material. (see drawing 1
and 2)
After rotor alignment the installation of the remaining spokes with the connection
material has to be effected (Pos. 3).
insertion direction
fixation of
storagemass
3063143_201501