Attaching Mounting Plate To Screen With Vesa 75 Or 100 Mounting Pattern - PEERLESS Paramount PC930A Manual Del Usuario

Attaching Mounting Plate to Screen with VESA 75 or 100 Mounting Pattern

Note: For VESA 200 x 100 mm and 200 x 200 mm hole patterns, skip to step 6.
• If screws don't get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly
secured, damage may occur to screen or product may fail.
5
Choose hole pattern as shown in figure 5.1 which matches hole pattern on back of your screen. Attach tilt bracket (F)
to back of screen using four M4 x 10 mm screws (M) or M4 x 12 mm screws (N) as shown in figure 5.2.
*Note: If hole pattern is in a pocket, attach tilt bracket (F) to back of screen using four M4 x 20 mm screws (O) and
four retaining spacers (P) as indicated in figure 5.2.
Skip to step 7
FOR VESA 75 MOUNTING PATTERN:
FOR VESA 100 MOUNTING PATTERN:
Visit the Peerless Web Site at www.peerlessmounts.com
fig. 5.1
WARNING
fig. 5.2
F
M, N or O
*For screens with a hole
pattern in a pocket,
spacers go between tilt
bracket and screen when
used with M4 x 20 mm
screws (O).
8 of 33
For customer care call 1-800-865-2112 or 708-865-8870.
P
ISSUED: 11-29-07 SHEET #: 202-9263-1