Proper Positioning On Vehicle Seat - Diono monterey XT Manual De Instrucciones

DISENGAGING LATCH INSTALLATION
Follow above instructions in reverse:
1) Depress the cam lock lever while pulling child seat away from the vehicle seat
back until the LATCH straps are extended all the way.
2) Disconnect LATCH connectors from vehicle anchors.
3) Pull LATCH adjuster straps to recess the LATCH connectors into the back of the
booster seat bottom for safe storage.

Proper Positioning on Vehicle Seat

Place booster seat on vehicle seat so it is resting firmly on vehicle
seat bottom and touching the vehicle seat back.
IMPORTANT: When using the booster seat as a high-back booster,
try to position backrest in full contact with vehicle seat back. It may
also be necessary to adjust the recline angle of the booster seat to
match that of the vehicle seat.
IMPORTANT: When using booster seat in center seating position,
make sure it is stable and does not rock from side to side.
IMPORTANT: Do not use LATCH if installation interferes with vehicle seat belt.
13