Appliance Description; Operating The Hob With The Sensor Keys - Teka GKST 3012 Instrucciones Para El Uso Y Montaje

Appliance description

The decorative design may deviate from the illustrations.
1. Induction cooking zone
2. Touch-control operating panel
3. Glass ceramic hob
4. ON/OFF key
5. Cooking zone selection key
6. Symbol for locating the position of a cooking zone on the
glass ceramic hob
7. Plus key (raise) / Minus key (lower)
8. Power setting display
9. Symbol for timer function
10. Control lamp: lights up when the timer function is on

Operating the hob with the sensor keys

The ceramic glass hob is operated with touch control sensor
keys. The sensor keys are operated as follows: lightly touch a
symbol on the surface of the ceramic glass plate. A buzzer will
indicate when the controls have been operated correctly. The
touch control sensor key will be indicated as "key".
18
ON/OFF key (4)
This key is used to switch the entire hob on and off. It is, as it
were, the main switch.
Cooking zone selection key; e.g. front left
Pressing one of the cooking zone selection keys available will
select a cooking zone, for which the Plus key or the Minus key
may be used to set the cooking level.
Minus key / Plus key
These keys are used to set the cooking levels, the automatic
switch-off device and the minute minder. The Minus key reduces
the setting and the Plus key raises it.
Power setting display
The power setting display shows the power setting which has
been selected, or:
Lights up brightly ...........Cooking zone has been selected
H....................................Residual heat display
P....................................Power boost setting
L ....................................Childproof lock
ER03 .............................Error message
Control lamp .......Timer function
GB
(5)
(7)
(8)
A
p
p l
i
a n
c
e
d
e s
c
r i
p
t i
o
n