Replacing The Air Filter; Changing The Engine Oil - Toro Recycler 20330 Manual Del Operador

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Replacing the Air Filter

Service Interval: Every 25 hours
1. Use a screw driver to open the air filter cover
(Figure 15).
Figure 15
2. Replace the air filter (Figure 16).
Figure 16
3. Install the cover.

Changing the Engine Oil

Service Interval: After the first 5 hours
Yearly
Run the engine a few minutes before changing the oil
to warm it. Warm oil flows better and carries more
contaminants.
1. Refer to Preparing for Maintenance.
2. Remove the dipstick (Figure 17).
1. Dipstick
3. Tip the mower onto its side with the air filter up
to drain the used oil out through the oil fill tube
(Figure 18).
4. Slowly pour oil into the oil fill tube until the oil level
reaches the Full line on the dipstick (Figure 17). Do
not overfill. (Max. fill: 20 oz. (0.59 l), type: SAE 30
detergent oil with an API service classification of SF,
SG, SH, SJ, SL, or higher.)
5. Install the dipstick securely.
6. Dispose of the used oil properly at a local recycling
center.
12
Figure 17
Figure 18

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Recycler 20330cRecycler 20331Recycler 20331cRecycler 20350Recycler 20351Recycler ... Mostrar todo

Tabla de contenido