Publicidad
Idiomas disponibles
Idiomas disponibles
: The grater and rasp surfaces as well as the edges of the inserts
❈ ✁ ✂ ✄ ☎ ✆ ✝
●
are very sharp! Danger of injury! Handle these attachments with caution!
5. Attach the holder (22) to the locating pin (21).
6. Place the lid in position on the processor bowl. Turn it to the right until it is
heard to lock in place.
7. Insert the plug into a 230 V / 50 Hz socket installed according to existing
regulations and with earthing protection.
8.
❙ ✞ ✟ ✠ ✡ ☛ ☞ ✌ ✠ ☛ ✍ ✎ ✏ ✏ ✑ ✟ ✎ ✌ ✡ ✍ ✎ ✌ ✒ ✓ ✍ ✠ ✎ ✓ ✏ ✍ ✍ ✒ ✔ ✍ ✠ ✞ ✍ ✍ ✌ ❡ ✎ ✌ ✒ ✕ ✞ ✟ ✠ ☛ ✓ ✞ ✟ ✠ ✡ ☛ ✐ ✖ ✗ ✘
9. Now fi ll the fi ller shaft (11) with your ingredients. Please note the maximum
fi lling level on the processor bowl.
10. After cutting/grating, turn the switch (2) back to „0" and pull out the plug.
11. Turn the lid to the left and remove it from the processor bowl.
12. Please remove the holder from the locating pin.
13. Remove the locating pin from the drive shaft.
14. The processor bowl can now be removed. The contents can now be taken out
of the bowl .
15. Clean the used parts as described in „Cleaning".
€ ✙ ♦ ✚ ✛ ✜ ✢
Parmesan etc.
Carrots, radish, cucumber,
onions etc.
Apples, potatoes, cabbage,
hard cheese
(e.g. Gouda) etc.
Potatoes
Cucumber, carrots etc.
❋ ✙ ✦ ✧ ✜ ✤ ✪ ✙ ✫ ✦ ✬
Potatoes can be easily and quickly cut into French fries with the French fry slicer
(26).
•
First follow the instructions contained under 1 to 3 under „Cutting and Ra-
sping", and then:
•
Attach the French fries disc to the locating pin.
•
❲ ✁ ❆ ✝ ☎ ✝ ✭
❉ ✣ ✧ ✮ ✦ ✙ ♦ ✪ ✫ ✧ ✯ ✛ ✙ ✰ ✱
•
Now fi ll the fi ller shaft (11) with your ingredients.
✁ ✚ ✯ ✛ ✬ ✢ ✣ ✲ ✳ ✦ ❈ ✛ ✢ ✢ ✫ ✧ ✮ ❉ ✫ ✬ ✜
With the cutting disc (27) you can easily and quickly cut slices of various thick-
nesses up to a maximum of 1 cm.
•
❲ ✁ ❆ ✝ ☎ ✝ ✭
❉ ✣ ✧ ✮ ✦ ✙ ♦ ✪ ✫ ✧ ✯ ✛ ✙ ✰ ✱
80
✺ ✴ ✴ ✴ ✴ ✵ ✶ ✺ ✵ ✷ ✸ ✹ ✻ ✼ ✽ ✾ ✿ ❀ ❁ ❂ ❃ ❀ ❀ ❄ ✻ ✶
✁ ✢ ✢ ✣ ✜ ✤ ✥ ✦ ✧ ✢
Grater (23)
Grater attachment, fi ne (24)
Grater attachment, coarse
(25)
French fry slicer (26)
Cutting disc (27)
: The cutting surfaces and edges of the slicer are extremely sharp!
Handle these attachments with caution!
: The cutting surfaces and edges of the slicer are extremely sharp!
Handle these attachments with caution!
★ ✩ ✦ ✦ ✚
1
1-2
1-4
1
1-2
✹ ❅ ✴ ✶ ✻ ✴ ✹ ✶ ✶ ✽ ❇ ❊ ❍ ■ ❏ ❊ ■ ✺ ✺ ❑ ▲ ✿
Publicidad
