Bottom Of Floor Nozzle - Shark Rocket HV300 Serie Instrucciones

Ocultar thumbs Ver también para Rocket HV300 Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

STEP 1
STEP 2

BOTTOM OF FLOOR NOZZLE

Use a coin to unlock the three locks on
1
the bottom of the floor nozzle.
2
A portion of the base is removable to allow
for better access to the brushroll and
exposure to the airway. Shine a flashlight
from the bottom to check for possible
blockages in the airway.
STEP 3
STEP 4
Remove any string, carpet fibers, or
3
hair that may be wrapped around the
brushroll. There is a groove along the
brushroll that allows a pair of scissors to
cut across it to loosen up debris.
To re-assemble, replace base by lining it
4
up along the front of the nozzle. Rotate
down to snap into place until you hear a
click. Lock the three locks.
s h a r kc l e a n . c o m
18

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

RocketHv300

Tabla de contenido