Toyota Celica 2000-2005
1. Unclip and remove the gear shifter trim
bezel and remove (2) Phillips screws
exposed below the climate controls.
(Figure A)
2. Pull off climate control knobs and remove
(2) Phillips screws exposed. (Figure A)
3. Unclip the climate control/factory radio
trim bezel and remove. (Figure A)
(Figure A)
4
DASH DISASSEMBLY
4. Remove (4) 10mm screws securing the
factory radio and disconnect the wiring.
5. Remove factory brackets from radio.
Retain brackets for use during kit
assembly.
Continue to Kit Preparation
(CONT)
Toyota Echo 2000-2005
1. Remove the climate control knobs and
(2) Phillips screws exposed. Unclip and
remove the climate control trim bezel.
Depress the side clips securing the climate
control panel and move the panel to
access (2) Phillips screws from the top of
the factory radio brackets. (Figure A)
(Figure A)
2. Remove the ashtray. Unclip and remove
the radio trim bezel. Remove (2) Phillips
screws from the bottom of the radio
brackets and disconnect the wiring.
3. Remove factory brackets from radio.
Retain brackets for use during kit
assembly.
Continue to Kit Preparation
|
1.800.221.0932
MetraOnline.com