Toyota 4-Runner 2003-2009 (Cont)
(excluding limited)
7. Remove (1) 10mm bolt beneath climate
control behind pocket door. Unsnap and
remove climate control. (Figure C)
8. Remove (2) 10mm bolts beneath radio
behind climate controls.
9. Unsnap and remove entire center panel
around radio. (Figure D)
10. Remove (2) 10mm bolts securing radio.
11. Unplug and remove radio.
12. Remove factory brackets from radio.
Retain brackets for use during kit
assembly.
Continue to Kit Preparation
DASH DISASSEMBLY
(Figure B)
(Figure C)
(CONT)
Toyota Tundra 2003-2006
1. Remove the (3) climate control
knobs by pulling straight outward.
(Figure A)
2. Remove (3) Phillips screws from
behind knobs. (Figure A)
3. Position vents facing upward and
remove (1) Phillips screw from
each A/C vent. (Figure B)
Continued on next page
(Figure A)
(Figure B)
REV. 12/5/2019 INST95-8202
7