Toyota Tundra 2003-2006 (Cont)
4. Unclip and remove entire trim
panel. (Figure C)
5. Remove (4) 10mm bolts to
remove radio. (Figure D)
6. Unplug and remove radio.
7. Remove factory brackets from
radio. Retain brackets for use
during kit assembly.
Continue to Kit Preparation
(Figure D)
8
DASH DISASSEMBLY
(Figure C)
(CONT)
Toyota Sequoia 2003-2007
1. Position vents facing upward and remove (1)
Phillips screw from each A/C vent. (Figure A)
2. Unclip and remove entire radio trim panel
including climate controls. (Figure B)
3. Remove (4) 10mm bolts to remove radio.
(Figure C)
4. Unplug and remove radio.
5. Remove factory brackets from radio.
Retain brackets for use during kit assembly.
Continue to Kit Preparation
(Figure A)
(Figure B)
(Figure C)
1.800.221.0932
|
MetraOnline.com