Toyota Highlander 2001-2007
(without factory navigation)
1. Pull and remove dash panel from radio
and climate controls. Tip: There are 8
clips. (Figure A)
2. Remove (6) 10mm bolts from radio and
climate controls assembly. (Figure B)
3. Remove assembly and disconnect the
wiring.
4. Remove (8) Phillips bolts and (4) Phillips
screws to separate brackets from
assembly. Retain brackets for use during
kit assembly. (Figure C)
Continue to Kit Preparation
(Figure C)
DASH DISASSEMBLY
(Figure A)
(Figure B)
(CONT)
Toyota Matrix 2005-2008
1. Unclip the bottom edge of the radio trim
panel then lift up and out to remove.
(Figure A)
2. Remove (4) 10mm bolts securing
the factory radio. (Figure B)
Continue to Kit Preparation
(Figure A)
(Figure B)
REV. 12/5/2019 INST95-8202
5