Lenco LED-3213 Instrucciones De Operación página 14

LE D COLOR TV
Press  /  button to select PC Settings, then press  /  button to adjust.
Auto Adjust Press MENU /  button to adjust to the screen automatically to the optimal position of
the picture.
H Position Adjust the horizontal position of the picture.
V Position Adjust the vertical position of the picture.
Phase Minimize horizontal distortion.
Clock Minimize vertical stripes in the screen image.
Screen Mode
Press  /  button to select HDMI Mode, then press  /  button to select Auto, Video or PC.
It is available in HDMI Input only.
Advanced Settings
Adjust advanced video features to fi ne tune the picture.
Press  /  button to select Advanced Settings, then press Enter /  button to enter sub-menu.
NR
Set options to reduce video noise.
Press  /  button to select NR, then press  /  button to select.
Off Select to turn off video noise detection.
Week Detect and reduce low video noise.
Medium Detect and reduce moderate video noise.
Strong Detect and reduce enhanced video noise.
Mpeg NR
Set options to reduce MPEG noise.
Press  /  button to select Mpeg NR, then press  /  button to select.
Off Select to turn off MPEG noise detection.
Week Detect and reduce low MPEG noise.
Medium Detect and reduce moderate MPEG noise.
Strong Detect and reduce enhanced MPEG noise.
Dynamic Contrast
Automatically adjust picture detail and brightness.
Press  /  button to select Dynamic Contrast, then press  /  button to select.
(Available Dynamic Contrast: Off , Week, Medium, Strong).
Main Menu Operation
9