Festo CPV-SC-DP Manual Del Usuario página 24

Removing an existing node
4. In order to remove the ribbon
cable:
Press and hold down the lock
ing hooks 4 for the plug of
the ribbon cable on the base
of the field bus node.
Press out the plug of the rib
bon cable. between the field
bus node and the valves.
Fitting a new node
1. Place the field bus node on the
valve terminal so that the
internal hook 2 locks into
position.
2. Tighten screw 1 (position see
Removing" step 1) with
0.5 Nm (±10 %).
3. Push the plug of the ribbon
cable 5 on the base of the
valve terminal into the guide
until the locking hooks 4 lock
into position.
24 Festo CPVSC−DP 0610NH English
4
2
5