Assembly - Attaching The Fan Blades; Attaching The Fan Blades - Home Decorators Collection 51472 Guía De Uso Y Cuidado

Assembly - Attaching the Fan Blades

10

Attaching the fan blades

□
Insert the blade (F) through the slot cut-off in the flywheel.
□
Align the three screw holes in the blade with the screw
holes in the flywheel and secure with the blade attachment
screws (AA).
□
Repeat for the remaining blades (F).
E
F
12
Attaching the light kit
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light kit.
□
Remove the three screws (FF) from the switch cup adaptor
(G) below the fan motor assembly (E).
□
Connect the wires from the light kit to the blue and white
wires from the switch cup adaptor (G).
□
Position switch cup (H) on the switch cup adaptor (G) below
the fan motor assembly (E) and align the three holes in the
switch cup adaptor (G).
□
Re-install the three screws removed in first step in this
section to secure the switch cup (H).
AA
11
Attaching the switch cup adaptor
□
Remove one screw (EE) from the black bracket below the
fan motor assembly (E). Loosen, but do not remove the
other two screws.
□
Align the key hole slots in the switch cup adaptor (G) with
the two screws in the black bracket.
□
Turn the switch cup adaptor (G) clockwise until the two
screws are situated in the narrow end of the keyholes.
□
Re-install the one screw (EE) that was removed in first step.
Tighten all three screws firmly.
FF
11
Please contact 1-800-986-3460 for further assistance.
E
G
EE
E
G
H
HOMEDEPOT.COM/HOMEDECORATORS