Features/ Specifications; General Safety Information - Ega Master 57099 Manual De Instrucciones

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

- 40:1 Ratio air motor.

- Angular design reduces the load distance and concentrates the center of gravity.

- 3 way loading - bulk, 14oz cartridge, filler pump.

- Air vent valve for purging remaining air.

- Light weight 1.6kgs reduces operator fatigue.

- Working pressure 40 psi ~ 100 psi.

- Output pressure 1600 psi ~ 4000 psi.

DEVELOPS

(330 BAR)

Handle Style

Air Inlet Pressure

Pressure Ratio

Compress ed Air Volume

Cartridge Loading

Suction Fill

Filler Pump Loading

* For grease guns fitted with bulk loader valve on grease gun head.

Always wear safety glasses when using a grease gun. Keep work area clean and remove

any excess grease from tools, hands, and clothing after use. Do not use grease gun whip hose

for other applications or at pressure levels above rated pressures.

GETTING READY TO USE THE AIR POWERED GREASE GUN

Air Supply: You need dry air to operate this gun. Make sure a FRL (Filter, Regulator, and

Lubricator) unit is installed in your airline.

Moisture in the air will damage the grease gun. The compressor you use must have a

minimum volume of 1 CFM (0.026 cubic meter). Inlet air supply should have a pressure

between 40

120 PSI (3–8 BAR). The recommended working pressure is 90 PSI (6 BAR). This grease

gun has a 40:1 pressure ratio; i.e. the grease discharge pressure will be 40 times the inlet air

pressure.

Lubrication: Like all air equipment, this grease gun needs regular lubrication. To lubricate,

add a few drops of oil through the air inlet on the grease gun. It is recommended to use SAE 30

or greater oil. Connecting the grease gun to air supply: There are several types of quick connect