Initial Setting Menu Functions; Changing The Fm Tuning Step (Fm Step); Switching The Auto Pi Seek (A-Pi); Setting The Warning Tone (Warn) - Pioneer KEH-P6900R Manual De Operación

Initial Setting Menu Functions

The Initial Setting Menu features the following functions.
www.DataSheet4U.com

Changing the FM Tuning Step (FM STEP)

Normally set at 50 kHz during Seek tuning in the FM mode, the tuning step changes to
100 kHz when the AF or TA mode is activated.
It may be preferable to set tuning step to 50 kHz in the AF mode.
1. Press the FUNCTION button and select the FM Tuning Step mode
(FM STEP) in the Initial Setting Menu.
2. Select the desired tuning step
with the 2/3 buttons.
Note:
• The tuning step remains set at 50 kHz during Manual tuning.
• The tuning step returns to 100 kHz if the battery is temporarily disconnected.

Switching the Auto PI Seek (A-PI)

During Preset Station PI Seek operation, you can switch the Auto PI Seek function
ON/OFF. (Refer to "PI Seek Function" on page 18.)
1. Press the FUNCTION button and select the Auto PI Seek mode (A-PI) in the
Initial Setting Menu.
2. Switch the Auto PI Seek
ON/OFF with the 5/∞ but-
tons.

Setting the Warning Tone (WARN)

You can switch the Warning Tone function ON/OFF. (Refer to "Warning Tone" on page
40.)
1. Press the FUNCTION button and select the Warning Tone mode (WARN) in
the Initial Setting Menu.
2. Switch the Warning Tone
ON/OFF with the 5/∞ but-
tons.
42