Controls And Operation; Care And Maintenance - Aircare CM330A Guía De Uso Y Cuidado

CONTROLS AND OPERATION

NOTE: The humidifier should be placed at least FOUR inches away from any walls
or curtains, and away from heat registers. Do not place on soft carpet.
Unrestricted airflow into the unit will result in the best efficiency and performance.
MODELS CM330A (ANALOG CONTROL PANEL)
HUMIDITY CONTROL
FAN SPEED
MODELS CM330D (DIGITAL CONTROL PANEL)
POWER
FAN SPEED
HUMIDITY
CONTROL
NOTE: If excessive condensation forms on wall or windows, reduce fan to a
lower speed setting or change location.

CARE AND MAINTENANCE

Cleaning your humidifier regularly helps eliminate odors and bacterial and
fungal growth. Ordinary household bleach is a good disinfectant and can be
used to wipe out the humidifier base and bottle/reservoir after cleaning .We
recommend cleaning your humidifier at least once every two weeks to maintain
optimum environmental conditions for your home. We also recommend using
®
AIRCARE or Essick Air
humidifier to eliminate bacterial growth. Add bacteriostat according to the
instructions on the bottle. Please call 1-800-547-3888 or visit www.essickair.com
or www.AIRCAREproducts.com to order Bacteriostat Treatment, part number
1970.
1) Turn the unit on by turning the speed knob to the
first speed.
2) This fan knob has three speed settings, High,
Medium and Low. Turn the knob clockwise to
decrease speed.
3) The humidity level knob is located above the fan
speed knob. Increase humidity by turning the upper
knob clockwise.
1) Turn the unit on by pressing the Power button.
2) Press the fan button to adjust the fan speed. The
indicator lights above will illuminate to indicate
High, Medium and Low speed.
3) Press the humidity button to increase the humidity
level. The indicator lights above will indicate low,
medium or high humidity selection.
®
Bacteriostat Treatment each time you refill your
6