Locate Place For Humidifier; Operation - Aircare 4DTS900 Guía De Configuración

NOTE: Follow Cautions on page 5 regarding additives
to water.
CAUTION: When filling, ensure chassis stays dry.
Be careful not to overfill bottles. Bottle damage can
result from this, and will cause bottles not to drain
properly.
3. Replace the caps on each bottle securely.
4. Lift each side cover and, using the handles, lower
each bottle into the cabinet, cap down. These bot-
tles only go in one way. When correctly placed, the
spring valve bottle cap meets a small peg on the
base, allowing water to flow into the reservoir.
Locate Place for Your Humidifier
1. Once the unit is assembled and filled, position it
in a location that allows humidified air to circulate.
See "Tips for Positioning" in the margin.
2. For best circulation throughout the house, place the
humidifier near the cold air intake for the furnace.
3. If needed, use a bubble level to ensure the humidi-
fier is sitting level in width and depth.
4. With the unit filled and set in place, plug it into wall
outlet.

OPERATION

Turn On and Set Controls
The Executive humidifier has a touch screen control
panel with icons on it for adjusting humidity, fan set-
tings and other functions.
Turn the unit on and off by pressing the power symbol.
1.
Adjust the fan speed up (F1 through F9) by press-
2.
ing the large fan symbol, and adjust the speed
down by pressing the small fan symbol.
Adjust the humidity up by pressing the large drop-
3.
let symbol and adjust it down by pressing the small
symbol. The range is from 25% to 65% increasing
in 5% increments. When set at 65%, the humidifier
will run constantly.
The LED display will show the adjustments, then
return to show ambient humidity of the area.
4. The auto humidistat feature turns the fan on and off
to maintain the humidity level you have selected.
FOR HELP, CALL 1.800.547.3888 OR VISIT AIRCAREPRODUCTS.COM
• On level surface near inside
wall.
• Centrally located where hu-
midity can be most needed.
• At least 2 inches from wall.
• Not next to thermostat or
hot air vent.
• Not by window (to avoid
condensation).
7
Tips for Position