Cooper Lighting MSLED Manual De Instrucciones página 5

MSLED 825-0504.qxd:Layout 1
WHAT TO DO IF
LIGHT DOES NOT COME ON
WITH MOTION AT NIGHT.
LIGHT COMES ON FOR NO
APPARENT REASON AT NIGHT
LIGHT STAYS ON AT NIGHT
AND DOES NOT TURN OFF
LIGHT IS ON DURING
THE DAY
Two Year Limited Warranty
THE FOLLOWING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER
WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY INCLUDING, BUT
NOT LIMITED TO, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY
PARTICULAR PURPOSE.
Cooper Lighting, LLC ("Cooper Lighting") warrants to customers that, for a period of
two years from the date of purchase, Cooper Lighting's products will be free from
defects in materials and workmanship. The obligation of Cooper Lighting under this
warranty is expressly limited to the provision of replacement products. This warranty
is extended only to the original purchaser of the product. A purchaser's receipt or
other proof of date of original purchase acceptable to Cooper Lighting. This is
required before warranty performance shall be rendered.
This warranty does not apply to Cooper Lighting products that have been altered
or repaired or that have been subjected to neglect, abuse, misuse or accident
For assistance, call 1-800-334-6871 or e-mail us at ConsumerProducts@cooperlighting.com
1/19/10 9:30 AM Page 5
Is the surrounding external ambient light too bright? (If so, the
unit may think it's daytime.)
• Re-aim the sensor.
• Relocate or reposition the unit away from the light.
Is the fixture being charged during the day?
• Solar panel must be connected to fixture when charging.
• Solar panel must be receiving sunlight to charge during
day. (reposition if shadowed)
• Solar panel must be clean and free from debris
• Check batteries, replace if necessary. Make sure
batteries have been charged for two full days of sunlight
prior to turning fixture on.
Is there motion in the detection zone?
• Make sure the sensor is not picking up moving objects
su ch as trees, traffic, etc.
TEST FOR YOURSELF
• Cover the sensor lens with cardboard to prevent sensor
from detecting motion. If the floodlight stays off,
something in the detection zone is triggering the sensor.
• If this is the case, reduce the sensitivity.
• Reposition motion sensor.
* If the light stays on with sensor lens covered, contact
customer service.
Is there motion in the detection zone?
• Make sure the sensor is not picking up moving objects
such as trees, traffic, etc.
• If this is the case, reduce the sensitivity.
• Reposition motion sensor.
• If the floodlight continues to stay on, contact customer
service
Is the knob on the sensor head in the daytime mode?
• Move the knob to the moon position.
Is the motion detector shadowed?
• Reposition motion sensor.
5