USING THE HAND MIXER
OPERATING THE SPEED CONTROL
This KitchenAid
Hand Mixer will beat faster and more thoroughly than most other
®
electric hand mixers. Therefore, the beating time in most recipes must be adjusted to
avoid over beating. Beating time is faster due to larger beater sizes.
To help determine the ideal beating time, observe the batter or dough and beat only
until it has the desired appearance described in your recipe, such as "smooth and
creamy". To select the best beating speeds, use the "Speed control guide" section.
Slide the Power switch to the
"I" (ON) position. The motor will
automatically start at Speed 1, and
2
the "1" on the speed indicator
control will light up.
When mixing job is finished, slide
the Power switch to the "O" (Off)
4
position. Unplug the Hand Mixer
before removing accessories.
8 | USING THE HAND MIXER
W10434747D.indd 8
Plug the Hand Mixer into an
1
electrical outlet.
Touch the "UP (arrow)" button to
increase the mixing speed to the
desired setting. If necessary, touch
the "DOWN (arrow)" button to
3
decrease the mixing speed. See the
"Speed control guide" for more
information.
NOTE: The Hand Mixer automatically
starts at Speed 1 every time it is turned
on, regardless of the Speed setting at the
time the Hand Mixer is shut off.
4/26/2018 3:28:55 PM