Function - Fermax VEO DUOX Manual De Instalador

DUOX X X X X VEO DUO DUO VEO VEO
DUO DUO VEO VEO
DUO DUO DUOX X X X X VEO DUO DUO VEO VEO VEO VEO
Audio settings
While the audio channel is open the audio's volume can be regulated via a contextual menu
on the screen. In order to set the audio, press MENU and a menu screen appears for this
setting.

FUNCTION

F1
Auto-Start:
Notes:
- Auto-start can only be done with the indicated panels. If you can not perform the auto-start,
ask your installer.
- After completing any communication with a panel, for the following 15 seconds if you re-press
the auto-start button it will connect with this panel.
Door lock-release
When a call is received from the entry panel, you can open the door
at any time, by pressing the button
Answering a call:
When the call button on the Entry Panel is pressed a call tone
sounds both on the panel and on the monitor, causing the screen
to start up.
You can pick up the phone receiver and have a conversation with the street
panel. The communication will automatically terminate after 90
seconds, or at any time by hanging up the phone.
If communication is not established (picking-up the receiver) with the entry
panel, the monitor will automatically turn off after 30 seconds.
In the audio settings, use the arrows to increase
or decrease until reaching the desired setting.
With the monitor in standby
button "camera"
of performing the auto start with different panels
by sequentially pressing
- Panel 0: Panel 0 of the monitor's corres-
ponding block.
- Panel 1: Panel 1 of the monitor's corresponding
block.
- Panels G: This is the 0 Panel configured as
General Entrance.
press the auto start
. It will display the possibility
:
Page 17