Safety Information - Style selections 48438 Manual Del Usuario

HARDWARE CONTENTS (shown actual size)
AA
1 in.
screw
Qty. 2

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install
the product.
WARNING
• Two people are required for safe installation. Take extra precautionary measures to ensure a
secure grip on the vanity base and top when lifting.
CAUTION
• To maintain the beauty of the vanity base finish, avoid placing the vanity base in direct sunlight.
• Avoid exposing the vanity base to extreme temperatures by installing away from heat and air vents.
• The bathroom floor must be finished prior to installation of the vanity base.
• Do not use water that exceeds temperatures of 140°F/46°C.
• Do not place any sharp or abrasive objects on the bare surface of the vanity top.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents. If any part is missing or damaged, do not attempt to assemble
the product.
Estimated Assembly Time: 2 hours (including removal of old vanity base, if applicable)
Tools Required for Assembly (not included): Tape Measure, Electric Drill with 2 in. Drill Bit, Level,
Pliers.
Helpful Tools (not included): Stud Finder, (2) M8 x 2 in. Screws and (2) Wall Anchors (if mounting
vanity base to wall).
BB CC
Knob Bumper
Qty. 2 Qty. 4
3