The Freestyle Lite Test Strip; Important Test Strip Information - Abbott FreeStyle Lite Manual Del Propietário

The FreeStyle Lite Test Strip

Apply blood or control solution to only one Test Strip
Sample Area per test.
Important: Use only one sample area of the test strip per
test. Do not apply blood to both sample areas. Test strips
may be used only once. Discard used test strips. You can
continue to fill the test strip for up to 60 seconds. Be sure
to reapply the sample to the same sample area.
WARNING:
The cap or vial contains drying agents that may be harmful if
inhaled or swallowed and may cause skin or eye irritation.
Important: The FreeStyle Lite Meter should only be used with FreeStyle
Lite Test Strips. Using other test strips with this meter can produce
inaccurate results.

Important Test Strip Information

• The FreeStyle Lite System has an operating range of 40° to 104° F
(4º to 40° C).
• Store the test strip package in a cool, dry place between 40° and 86° F
(4° to 30° C).
• Use test strips only within the system operating temperature range.
• Keep away from direct sunlight and heat.
• Store your test strips in their original vial only; never transfer them
to another vial or any other container.
• Never store individual test strips outside the vial.
• After removing a FreeStyle Lite Test Strip from the vial, immediately
close the vial cap tightly.
• With clean, dry hands, you may touch the test strip anywhere when
removing it from the vial or inserting it into the meter.
9 Call Customer Care Toll Free at 1-888-522-5226 www.AbbottDiabetesCare.com
Test Strip
Sample Area