Meter Maintenance Battery; Replacing The Battery - Abbott FreeStyle Lite Manual Del Propietário

Ocultar thumbs Ver también para FreeStyle Lite:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Meter Maintenance
Battery
Your FreeStyle® Lite Meter comes with one preinstalled, #2032,
3 volt, lithium battery. The battery provides enough power for the
meter to perform about 500 tests. If your battery runs low, the battery
symbol (
battery. When the battery runs low, the display backlight and test light
may not power on.
Important: When this symbol appears, or when the backlight and test
light begin to dim, you should replace the battery immediately.
To avoid losing the time and date settings, replace the battery within
one minute of removing the old battery.
If you take more than one minute to replace the battery, you may
need to reset the time and date to get the correct 7-, 14- and 30-day
averages. If the time and date settings are lost, the time and date
displays flash 12:00 and 00-00 until they are reset.
Removing the battery does not affect the meter's memory log or
previously-stored user settings (such as date and time format).
Even if you lose your time and date settings – you can perform a
blood glucose test, and results will not be affected.

Replacing the Battery

1
27
Call Customer Care Toll Free at 1-888-522-5226 www.AbbottDiabetesCare.com
) appears on every display screen until you change the
Turn the meter over. Press in the battery
door clip to open. Swing the battery door up
to open and then off the meter.
To remove the battery, push the battery
downward to release the battery.

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido