Maintenance And Repair - Maclaren techno xlr Manual De Usario

EN
General Information & Safety
WARNING:
USE THE SEAT HARNESS. ALWAYS USE THE cROTcH STRAP IN cOMbINATION WITH THE WAIST
bELT AND SHOULDER STRAPS. NEVER LEAVE cHILD UNATTENDED.
IMPORTANT: KEEP THESE INSTRUcTIONS FOR FUTURE REFERENcE. A cHILD'S SAFETY IS YOUR
RESPONSIbILITY. THIS VEHIcLE IS SUITAbLE FOR ONE cHILD.
• W ARNING: Any load attatched to the handle affects the stability of
the buggy.
• WARNING: This buggy is not suitable for running or skating.
IMPORTANT - It is important for your child's safety that the harness be
•
correctly fitted and adjusted. If not adjusted correctly in accordance
with the instructions the stability of the buggy will be impaired.
• The child should be clear of moving parts while making adjustments.
IMPORTANT - DANGER: It is important that great care is taken to ensure
that children are kept well clear of the buggy when folding or unfolding
the product. Finger traps and scissoring actions are unavoidable during
these operations.
• Follow all instructions carefully. Incorrect use will cause damage to buggy.
• This product has been designed to take the weight of a child of 65 lb maximum
and a maximum height of 44".
• Children should be harnessed in at all times and should never be left
unattended.
• The harness and seat belt are not a substitute for proper adult supervision.
• Do not carry additional children, goods or accessories in or on this buggy except
as permitted in this leaflet. They may cause the buggy to become unstable or
place undue stress on the buggy that could lead to breakage.
• Overloading, incorrect folding and the use of accessories, i.e. child seats, bag
hooks, rain covers, buggy boards, etc., other than those approved by Maclaren
may damage or break this vehicle.
• I t may be unsafe to use accessories not supplied and approved by Maclaren,
items such as child seats, bag hooks, rain covers, buggy boards etc will not be
covered by the terms of our warranty.
• Never leave child in the buggy when ascending or descending stairs or
escalators or when travelling on other forms of transport.
• The buggy should always open and fold easily. Do not force it. It may be
necessary to re-read the instructions.
• Negotiate curbs and rough ground carefully. Repeated impact will cause
damage to the buggy.
• Never allow children to stand on the footrest.
• Do not leave the buggy exposed to heat, i.e. by a radiator or in direct sunlight.
• Do not place items on the top of the hood as it may cause damage to the hood.
2
AVOID SERIOUS INJURY FROM FALLING OR SLIDING OUT. ALWAYS

MAINTENANcE AND REPAIR

• This vehicle requires regular maintenance by the user. Regularly check all rivets
and connecting devices for tightness and security. Inspect all brakes, wheels
and tires and replace or repair if necessary. Check all safety devices for correct
operation, in particular the primary and secondary locks. These should be free to
move at all times. Never continue to use a product that is not structurally sound.
• We recommend a service every 12 months.
• If wheels squeak, lubricate sparingly with Teflon or silicone coating. Do NOT
use oil or grease based products, as this will attract dirt, which will clog the
movement.
• Only Maclaren replacement parts should be used. It may be unsafe to use parts
not supplied by Maclaren.
cLEANING
• Clean frame with a damp cloth and a mild detergent and dry thoroughly.
Do not use abrasives.
• If the buggy chassis parts have been exposed to salt water we recommend
that they be rinsed down with fresh (tap) water as soon as possible after-
wards.
• The hood may be sponged lightly using a damp cloth and a mild detergent
The seat, head cushion and harness pads may be washed - see care labels for
details. Dry thoroughly before reuse.
• Do not fold or store the product while wet and never store in a damp
environment as this can cause mildew to form.
Maclaren reserves the right to make design changes to any of their products as part
of their continuous improvement programme.
This product is designed and manufactured to comply with ASTM F833 Standard
Consumer Safety Performance Specification for Carriages/Buggys and is JPMA
certified. This product is designed and manufactured to comply with Canadian
standard SOR/91-350,s. 1(F) Carriages and Buggy Regulations.