Specifications - Textron Jacobsen Ryan 544853C Manual Del Usuario

3.1 SPECIFICATIONS

3.1
Axles . . . . . . . . . . . . . . .
Blades . . . . . . . . . . . . .
Blades, oscillating . .
Chassis . . . . . . . . . . . .
Clutch . . . . . . . . . . . . . .
Cut-off drive . . . . . . . .
Cut-off length . . . . .
Cutting speed . . . . . . .
Cutting thickness . . .
Drive . . . . . . . . . . . . . . .
4
SPECIFICATIONS
Drive wheel; splined 1 3/4"
(44.5 mm) diameter mounted
in ball bearings.
Rear; center pivot rocking.
High carbon steel.
Hardened and sharpened.
1,135 oscillations/min. at
2600 engine rpm.
One-piece cast iron gear case.
Belt tightener type.
#50 roller chain from gear case.
Adjustable from 1 ft. to 9 ft.
(305 mm to 2.7M)
Ft./min. (Meters/min.)
Low gear High gear
150' (45.7 m) 188' (57.3 m)
Theoretical at 2600 rpm.
Precisely adjustable to 2 1/2"
(63.5 mm)
Two banded A-section belts
from engine to gear case.
Ten-pitch gears and #50 roller
chain running in oil, in gear
case
to drive wheels.
Engine . . . . . . . . . . . . .
Lubrication . . . . . . . . .
Reduction . . . . . . . . . .
Rolling racks . . . . . . .
Transmission . . . . . . .
Weight . . . . . . . . . . . . .
Wheel Base . . . . . . . . .
Seven-pitch gears to eccentric
shaft to oscillating blade.
Kohler 11 h.p. with rewind
starter. Model CH 11T, Specifi–
cation No. PS–1619.
Governor set at 3200 r.p.m.
at no load. Engine displace–
ment is 24.3 cu. in. (398 cc) and
develops 20.2 ft.–lbs. (27.4
N m) of torque at 2000 r.p.m.
Oil splash in gear case,
pressure lubrication fittings
elsewhere.
Engine to blade; 2.29:1
Engine to drive wheels;
High; 29.1:1, Low; 36.2:1
Engine to auto cut-off; 4.82:1
Adjustable to various sod
lengths, 6 ft. (1,829 mm) to
9 ft. (2,743 mm)
Sealed case. Two forward
speeds and neutral. Dog
clutch to disengage blade.
All gears heat-treated steel.
544853 - 16" 522 lbs. (237 kg.)
544854 - 18" 551 lbs. (250 kg.)
22 3/4" (578 mm) without Sulky
60 3/4" (1,238 mm) with Sulky