TEFAL ULTRAGLIDE EASYCORD FV42 Serie Instructivo De Operación página 10

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1800123494 FV42XX-FV43XX FTD US_110x154 20/06/11 16:24 Page5
To clean the iron
It is recommended that you clean the iron once a month to slow down scale build up and prolong
the life of the iron.
Clean your iron as noted below:
Unplug the iron, set the steam control lever to
Place the iron on its heel, set the temperature dial to MAX, plug in the iron and wait for the indicator light
to go out.
Unplug the iron and place it horizontally over a sink.
Press the
Self-Clean
Gently shake the iron over the sink until all of the water (along with impurities) runs out through
the soleplate.
At the end of the operation, put the anti-scale valve back into the iron and allow it to heat for 2 minutes
on its heel to dry the soleplate.
Never use abrasive or
aggressive products.
ejection button (
fig.14a
) and remove the anti-scale valve (
Unplug the iron. When the soleplate is slightly warm, wipe it with
a soft cloth.
and fill the water tank to MAX.
To clean the soleplate
5
fig.14b
).

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ultraglide easycord fv43 serie

Tabla de contenido