Publicidad
Idiomas disponibles
Idiomas disponibles
Before beginning a workout session ensure Safety Key is properly attached onto the Console
and Safety Clip is securely attached to an article of your clothing. Always begin treadmill
standing on the side rails not on the running belt. Allow the treadmill to reach a speed of at
least 1.0km/h, before walking on the running belt.
1.
Ensure this treadmill is plugged into 220 voltage which has a grounding plug.
2.
Press the Power Switch located at the front of the treadmill (see page 5 ) to the ON
position, press "START/STOP" key, the machine will slow start.
3.
On standby or running time, catch both side of heart inductor, the console screen will
show data of heart frequency. It will not show the data when catch just one side.
4.
Pull off Safety Key for any emergency situation. The machine will stop automatically
within 5 seconds after pull off Safety Key.
CAUTION & INSTRUCTION
22
Publicidad
Capítulos
