NOTE : ENSURE THAT THE POWER SWITCH IS IN THE OFF POSITION AND THE POWER
CORD IS UNPLUGGED FROM THE ELECTRICAL OUTLET.
FOLDING UP:
•
Hold the rear end with one hand and then lift the deck up until the steel ball pops into
the place.
Note: Check the Cylinder' pops' down into the locked position before moving thetreadmill.
UNFOLDING:
•
Hold the rear end with one hand and then pull the cylinder to unfold the treadmill.
•
Do not stand under the deck when unfolding the treadmill.
TO PREVENT ANY INJURY PLEASE MAKE SURE YOU HAVE A FIRM HOLD WHEN
LIFTING UP OR SETTING DOWN THE DECK.
FOLDING UP & UNFOLDING
23