Help, Lubrication - SPORTSTECH F26 Manual De Usuario

Before completing an exercise session always:
1. Allow time to slow your cool down, reducing your heart rate to a normal level before
completing your workout.
2. Grasp the handlebar and press the slow speed key. Slow your pace to an easy walk.
3. Ensure the running belt has come to a complete stop before exiting the treadmill.
WARNING:
Turn off and unplug the treadmill before proceeding with any maintenance or visual
inspections. Failure to do so may result in serious injury.
Note: Failure to perform the required periodic and preventative maintenance can void your
warranty.
AT THE END OF EVERY EXERCISE SESSION ALWAYS:
1. Remove the Safety Key from the Console.
2. Use the Power Switch to turn the treadmill off.
3. Always position and store the Power Cord where it is clear from all pathways.
4. Unplug the Power Cord from the electrical outlet. This is especially important if
you are not going to use your treadmill for extended periods.
5. Wipe all treadmill surface with a dry cloth or towel especially perspiration on the
handlebars, console, running belt or other treadmill components.
STORAGE:
• Store your treadmill in a clean and dry environment. Ensure the Power Switch is off
and is unplugged from the electrical outlet.
MOVING:
• Check the Cylinder into the locked position before moving the treadmill.
• The treadmill has been designed and equipped with wheels for easy mobility. Before
moving, ensure the Power Switch is in the 'OFF' position and the power cord is
unplugged from the electrical outlet. Tilt the base frame of the treadmill and then roll
the treadmill to the desired position.

HELP, LUBRICATION

27