Hart HTMS01 Manual Del Operador página 19

ASSEMBLY
FIG. 18
MITER
FENCE
SQUARE
VIEW OF BLADE NOT SQUARE WITH FENCE,
ADJUSTMENTS ARE REQUIRED
FIG. 19
SOCKET HEAD
SLIDING
SCREW(S)
PARTIAL FENCE
FENCE
SCREW
MITER
FENCE
 Loosen the fence screw and slide the partial sliding miter
fence toward the blade to access the socket head screws
securing the left miter fence to the table.
 Using the blade wrench, loosen the socket head screws
that secure the miter fence to the miter table.
 Rotate the miter fence left or right until the saw blade is
parallel with the square.
BLADE
MITER
TABLE
SOCKET HEAD
SCREW(S)
FIG. 20
INDICATOR
BEVEL
SCALE
SCALE
INDICATOR
FIG. 21
SCALE
INDICATOR
 Retighten the screws securely and recheck the blade-to-
fence alignment.
Your saw has several scale indicators. After squaring adjust-
ments have been made, it may be necessary to loosen the
indicator screws and reset them to zero. See figures 20 - 21.
19 – English
BEVEL
LOCK KNOB
SCREW
INDICATOR
SCREW
MITER
SCALE