B
EGIN
Assemble Pre-Assembled RIGHT SIDETABLE in detail 10-A.
Step
Assemble Pre-Assembled LEFT SIDETABLE in detail 10-B.
10
Note: Use both hands and lift with side table brackets. NEVER lift with plastic parts.
10-A
12
Grill
Front
10-A. Use the 6-lobe screwdriver to back out the outside screws located
in the top right legs (2 or 3 turns) just enough for the SIDE
BRACKETS (11 and 13) on the PRE-ASSEMBLED sidetable, to
slide in place.
CAUTION: DO NOT Remove screws completely.
Place the bottom slot of the brackets on the screws first and then the
top slot. Note: The TOOL BAR (12) faces the front of the grill.
Gently slide the Bracket down and tighten screws.
W
C
B - S
ITH
ARTON
IDE
P
- A
RE
SSEMBLED
S
IDETABLE
Right
T
A
ABLE
SSEMBLIES
10-B
P
- A
RE
SSEMBLED
S
IDETABLE
6-
LOBE
SCREWDRIVER
Left
10-B. Use the 6-lobe screwdriver to back out the outside screws located in the
top left legs (2 or 3 turns) just enough for the SIDE BRACKETS (11 and 13)
on the PRE-ASSEMBLED sidetable, to slide in place.
CAUTION: DO NOT Remove screws completely.
Place the bottom slot of the brackets on the screws first and then the top slot.
Note: The TOOL BAR (12) faces the front of the grill.
Gently slide the Bracket down and tighten screws.
(Pg. 12)
12
Grill
Front