Scope Of Supply - Graf Carat S Instrucciones Para El Montaje

The scope of supply for the fluid bed XXL set-up kit includes:
Inlet and outlet scum baffles for the individual preliminary sedimentation tanks, fluid bed tanks,
•
final sedimentation tanks and sludge accumulators,
Lip seals in DN 100 for the tank connections. For 50 inhabitants or more a DN 150 seal is
•
included, in case the supply line is in DN 150,
Control equipment,
•
Compressor.
•
The following are not included in the scope of supply:
KG pipes for the tank connections,
•
Hoses to supply air from the switch cabinet to the septic tanks. The air hoses needed can be
•
taken from Tabelle 1,
Lubricant, sealant, Teflon tape, etc.,
•
Core drill Ø 124mm. This can be ordered separately from Otto Graf GmbH,
•
Carat S septic tanks; these should be ordered separately.
•
The control equipment consists of the control cabinet with microprocessor control, motor protection switch
(for 50 inhabitants or more), 1-2 solenoid valves and the air compressor.
Separate instructions are available detailing how to operate and service the control unit.
For systems for less than 50 inhabitants, power is supplied through an earthed safety socket to be
provided by the customer. Larger systems must be connected by an electrician in accordance with the
terminal plan supplied. It is essential to observe the compressor's direction of rotation.
Table 2: Carat tanks and compressor type needed for Fluid bed XXL systems
Inhabitants Inhabitants 20 20
Primary sedimentation Primary sedimentation 2 x 3750 2 x 3750
Fluid bed Fluid bed 1 x 2700 1 x 2700
Final sedimentation Final sedimentation 1) 1) 1 x 2700 1 x 2700
Sludge accumulator Sludge accumulator - -
Carrier material Carrier material 2) 2) [m [m 3 3 ] ] 0,7 0,7
Compressor type Compressor type LP 200 LP 200
Power [kW] Power [kW] 0,26 0,26
1 ~ 1 ~
Voltage Voltage
220 V 220 V
Control unit Control unit ZK ZK
Control cabinet Control cabinet
dimensions dimensions 3) 3) 50x50x30 50x50x30
[l x w x d cm] [l x w x d cm]
Ø Hose Ø Hose
19 19
aeration [mm] aeration [mm]
Ø Hose Ø Hose
- -
excess sludge [mm] excess sludge [mm]
For installation sizes with only one final sedimentation tank it is necessary to install a diving wall in this tank (position ½).
1)
Delivery in Bigbag (1,0 m³) and sack (0,1 m³)
2)
You have to install the compressor in a technical room if one of the compressor type line KDT is used
3)
info@graf.info
www.graf.info
1.

Scope of supply

28 28 36 36 44 44
2 x 4800 2 x 4800 2 x 6500 2 x 6500 2 x 6500 2 x 6500
1 x 3750 1 x 3750 1 x 3750 1 x 3750 1 x 3750 1 x 3750
1 x 3750 1 x 3750 1 x 3750 1 x 3750 1 x 3750 1 x 3750
- - - - - -
0,9 0,9 1,3 1,3 1,5 1,5
DT 4.10 DT 4.10 DT 4.10 DT 4.10 DT 4.16 DT 4.16
0,23 0,23 0,23 0,23 0,44 0,44
1 ~ 1 ~ 1 ~ 1 ~ 1 ~ 1 ~
220 V 220 V 220 V 220 V 220 V 220 V
ZKplus ZKplus ZKplus ZKplus ZKplus ZKplus
60x60x35 60x60x35 60x60x35 60x60x35 60x60x35 60x60x35
19 19 19 19 19 19
19 19 19 19 19 19
50 50 70 70 90 90
3 x 4800 3 x 4800 3 x 4800 3 x 4800 3 x 6500 3 x 6500
1 x 4800 1 x 4800 1 x 6500 1 x 6500 2 x 4800 2 x 4800
1 x 4800 1 x 4800 1 x 6500 1 x 6500 2 x 4800 2 x 4800
- - - - 1 x 4800 1 x 4800
1,7 1,7 2,6 2,6 3,4 3,4
KDT KDT
DT 4.25 DT 4.25 DLT 40 DLT 40
3.60 3.60
0,80 0,80 1,5 1,5 2,4 2,4
1 ~ 1 ~ 3 ~ 3 ~ 3 ~ 3 ~
220 V 220 V 400 V 400 V 400 V 400 V
Zkplus Zkplus Zkplus Zkplus Zkplus Zkplus
Compressor installed on ground, solenoid valves and Compressor installed on ground, solenoid valves and
80x70x50 80x70x50 80x70x50 80x70x50
19 19 19 19 2 x 19 2 x 19
19 19 19 19 2 x 19 2 x 19
12 / 40
120 120 140 140 160 160
4 x 6500 4 x 6500 4 x 6500 4 x 6500 5 x 6500 5 x 6500
2 x 6500 2 x 6500 2 x 6500 2 x 6500 3 x 6500 3 x 6500
2 x 6500 2 x 6500 2 x 6500 2 x 6500 2 x 6500 2 x 6500
1 x 6500 1 x 6500 1 x 6500 1 x 6500 1 x 6500 1 x 6500
4,6 4,6 5,2 5,2 5,9 5,9
KDT KDT KDT KDT KDT KDT
3.60 3.60 3.80 3.80 3.100 3.100
2,4 2,4 2,4 2,4 4,0 4,0
3 ~ 3 ~ 3 ~ 3 ~ 3 ~ 3 ~
400 V 400 V 400 V 400 V 400 V 400 V
Zkplus Zkplus Zkplus Zkplus Zkplus Zkplus
control cabinet mounted on wall control cabinet mounted on wall
2 x 19 2 x 19 2 x 19 2 x 19 3 x 19 3 x 19
2 x 19 2 x 19 2 x 19 2 x 19 2 x 19 2 x 19
200 200
5 x 6500 5 x 6500
3 x 6500 3 x 6500
2 x 6500 2 x 6500
2 x 6500 2 x 6500
6,8 6,8
KDT KDT
3.140 3.140
5,5 5,5
3 ~ 3 ~
400 V 400 V
Zkplus Zkplus
3 x 19 3 x 19
2 x 19 2 x 19