Matrix R30 Manual Del Usario página 12

A Open HARDWARE FOR STEP 3.
3
B Carefully feed the CABLE (4) through the HANDLEBAR
ASSEMBLY (9) and tuck excess wire inside the console masts.
C Attach HANDLEBAR SET (9) to the CONSOLE MASTS (6 & 7)
U30
using 8 BOLTS (B). Torque settings: 23.1 Nm / 17 lb-ft.
D Using the LEAD WIRES (10), carefully feed the WIRES (11) through
U50
the handlebar assembly one set at a time. Discard the lead wires
and wire ties. Attach HANDLEBAR (12) to the HANDLEBAR SET (9)
using 4 BOLTS (C) and 4 NUTS (D). Torque settings: 9.5 Nm / 7 lb-ft.
Hardware For Step 3
Description
B Bolt
C Bolt (pre-installed)
D Nut (pre-installed)
C 11 12
12
Qty
8
4
4
10
D
B
7
A Open HARDWARE FOR STEP 4.
4
B Attach the WATER BOTTLE HOLDER (13) to the
CONSOLE MASTS (6 & 7) using 4 SCREWS (E).
C Attach the CONSOLE BRACKET (14)
U30
to the HANDLEBAR SET (9) using 4
BOLTS (F) and 4 NUTS (D).
U50
Hardware For Step 4
Description
E Screw
F Bolt
D
Nut
9
4
6
U50 SHOWN
Qty
4
4
4
14
F
9
13
E
7
D
6