Assembling The Booster Seat - Graco 8491 Manual Del Propietário

Assembling the Booster Seat

Step 1.
Insert armrest into base
as shown until buttons
snap into slots on side of
1
base .
Step 2.
Select the desired
armrest height for your
child, then insert the
height adjustment
screw and tighten.
2
Repeat for other
armrest.
Step 3.
To adjust armrests,
remove screw and press
in button on side of base
as shown to raise or
lower . Reinsert
3
screw and tighten.
CHECK to make sure
armrests are securely
attached by pulling up
on them.
1
SNAP!
2
3
9