GYS GYSFLASH 3.48 PL Manual De Usario página 7

Translation of the original manual
SAFETY INSTRUCTIONS
This manual contains safety and operating instructions, to be
followed for your safety. Please read it carefully before using
the device for the first time and keep it for future reference.
Read and understand the following safety instructions before
use. Any modification or update that is not specified in the
instructions manual should not be undertaken. The manufacturer
is not liable for any injury or damage due to non-compliance
with the instructions featured in this manual. If there is any issue
or uncertainty, please consult a qualified individual to operate
the equipment correctly. This machine should only be used for
charging operations specified within the limits indicated on
the machine and in the instruction manual. The operator must
observe the safety precautions. In case of improper or unsafe
use, the manufacturer cannot be held liable.
This unit can be used by children aged 8 or over and by people
with reduced physical, sensory or mental capabilities or lack
of experience or knowledge, if they are properly monitored
or if instructions for using the equipment have safely been
read and potential risks understood. Children must not play
with the product. Cleaning and maintenance should not be
performed by an unsupervised child.
Do not use for charging non-rechargeable batteries
Do not operate the device with a damaged power supply
cord or a damaged mains plug.
Never charge a frozen or damaged battery.
Do not place the device near a fire or subject it to heat or to
longterm temperatures exceeding 60°C
The automatic mode of operation and usage restrictions are
explained below in these operating instructions.
Fire and explosion risks!
A battery can release explosive gases when on charge.
• During the charge, the battery must be placed in a well
ventilated area.
• Avoid flames and sparks. Do not smoke near the device.
• Protect the electrical contact surfaces of the battery
against short circuits.
Do not leave a charging battery unattended for a long time.
Connection / disconnection :
• Ensure that the charger is not connected to the mains before
connecting or disconnecting clamps to the battery terminals.
GYSFLASH 3.48 PL
EN
7 7