Fein GRIT GIC Instrucciones De Uso página 10

en
10
Original Instructions for Cylindrical Grinding Device.
Symbols, abbreviations and terms used.
The symbols in the Instruction Manual and on the
machine shall aide in directing your attention to possible
hazardous situations when working with this machine.
Symbol Term, meaning
Action
Touching prohibited
General mandatory sign
Read documentation
Use eye-protection
Wear ear protection
Use dust mask
Use protective gloves
Danger warning
European conformity symbol
For your safety.
Do not use this machine before you have
thoroughly read and completely under-
stood these operating instructions, includ-
ing the figures, specifications, and safety regulations.
Please also observe the relevant national industrial safety
regulations (e. g. in Germany: BGV A2, BGR 500).
Non-observance of the safety instructions can lead to an
electric shock, fire and/or severe injuries.
These operating instructions should be kept for later use
and enclosed with the power tool, should it be passed on
or sold.
Read and observe the operating instructions
of the GI75/GI150 belt grinder, which is to
be mounted to this machine.
For assembly of the cylindrical grinding device to the belt
grinder, use only the fastening material provided. Faulty
assembly can cause the cylindrical grinding device to
loosen from the belt grinder during operation and lead to
serious accidents.
Use safety glasses. The safety glasses must be capa-
ble of protecting against flying particles generated
by the various different operations.
Before switching on, make sure that no work piece is
inserted in the cylindrical grinding device. The work piece
can be thrown from the machine and cause serious acci-
dents.
Never touch the running grinding belt. Danger of
injury.
Press the emergency-off switch immediately in danger sit-
uations. The machine runs on for up to 50 seconds.
Clean the ventilation slots of the machine regularly. The
motor fan draws dust into the housing. Excessive accumu-
lation of metal dust can cause electrical dangers.
The mains plug of the machine may be mounted only by a
qualified electrician. The protective conductor in the
mains socket outlet must be connected with the protec-
tive earthing of the mains supply.
Pull out the mains plug for maintenance and repair! Switch-
ing the machine on unintentionally can lead to serious
injuries.
Have the electrical safety of the machine checked regularly
in accordance with statutory regulations. For machines
that have not been checked, there may be danger of elec-
trical shock!
Check the rotation direction of the motor before starting the
operation of the machine for the first time. If the rotation
direction of the motor is incorrect, the workpiece can be
thrown from the machine and cause an accident. The
rotation direction may be changed only by a qualified
electrician.
Always work with great attention and care, especially when
guiding in and removing the working material. Diminishing
attention can lead to serious injuries of your hands.
Be careful when working short or thin material. When
guiding in and removing, the grinding belt or the brake
wheel can catch hold of your hands and cause serious
injuries.
Be careful after switching off. The machine will run on for
approx. 1 minute. Carry out adjustments and mainte-
nance only when the grinding belt has come to a com-
plete stop.
At a glance.
1 Belt tension lever (GI75/GI150)
2 Cover/stop (GI75/GI150)
3 Spark guard (GI75/GI150)
4 Star-knob bolt for dust box (GI75/GI150)
5 Grinding rest (GI75/GI150)
6 Dust collector (GI75/GI150)
7 Lever for swivel device (GI75/GI150)
8 Side cover (GI75/GI150)
9 Eccentric clips, GIC
10 Eccentric lever
11 Mounting bolts
12 Drive motor for brake wheel
13 Clamping lever for brake-wheel parallelism
14 Connection socket
15 Basin with container
16 Handle
17 Adjustable feet
18 Lever for applying the brake wheel to the work piece
19 Brake wheel
20 Belt tension lever
21 Clamping lever for brake-wheel clearance
22 Crank for feed pressure
23 Bolt for guide-rail adjustment
24 Guide rail
25 Gap opening