Style selections F15-I-005-071B Instrucciones De Ensamblaje página 12

OPERATING INSTRUCTIONS
4. Power: Push button to turn on or turn off. If OFF,
heater will be restored at the next power ON.
Note: Unplugging the unit will reset all functions.
5. Flame: Press to activate the flame function. This
button controls the brightness of flame and ember
effect. When the fireplace is first turned on, the flame
will come on at the highest setting; press DOWN or UP
button to adjust the brightness of flame. There are 6
levels you can cycle through, including the OFF setting
(the ember remains on). When adjusting the flame
brightness with UP and DOWN button, the number of
the flame level bars corresponds to the 5 brightness
levels. When this feature is on, display screen FLAME
icon is on also.
6. Heater: Press to activate the heater function. The
system will start the temperature setting at 95°F.
There are 7 adjustable heat levels, ranging from 65°F
to 95°F. Press the DOWN or UP button to adjust the
levels, noting each level increases or decreases the
temperature by 5°F. When this feature is on, display
screen HEATER icon is on also. And when this feature
is off, the inner blower will continue to run for additional
1 minutes to cool down the unit in order to protect the
heating elements before the unit completely shuts off.
Note: You can switch the temperature display from
Fahrenheit to Celsius by pressing and holding the
HEATER button on control panel for approximately 6
seconds. Without any adjustments after approximately
6 seconds, the display screen will show the room
temperature.
4
5
6
12
Lowes.com