Style selections F15-I-005-071B Instrucciones De Ensamblaje página 6

ASSEMBLY INSTRUCTIONS
Note: Do not fully tighten the bolts on the assembly until mantel is completed. Assemble the item as
close to its final location as possible.
1. Insert wood dowels (AA) into bottom frame (A).
Line up holes on one bottom side panel (D) with
wood dowels (AA) and attach to bottom frame
(A) using short cross bolts (BB), spring washers
(EE) and flat washers (FF). Tighten with Phillips
screwdriver (not included), but do not overtighten.
Repeat for the other bottom side panel (D), left
middle panel (B) and right middle panel (C), making
sure the finished side is facing forward.
Hardware Used
AA Wood Dowel
BB Short Cross Bolt
EE Spring Washer
FF Flat Washer
2. Insert wood dowel (AA) into hole on left middle
panel (B) and right middle panel (C). Then, attach
front molding (E) to left middle panel (B) and right
middle panel (C) with long screws (HH). Tighten with
Phillips screwdriver.
Hardware Used
AA Wood Dowel
HH
Long Screw
1
BB
D
AA
A
x 8
x 8
x 8
x 8
2
x 2
x 2
6
EE
D
FF
B
C
A
HH
E
AA
C
E
D
B
C
Lowes.com
D
D