Carlson Pet Products 2600 Manual Del Propietário página 8

STEP 5
Reassemble the upper locking joint by adding one of the previously removed toothed disks
and locking knobs.
STEP 6
Tighten each of the locking knobs by
turning them clockwise, fixing the pet
pen into the configuration you have
chosen. To position the pet pen into
a new configuration or shape, simply
loosen each of the locking knobs,
adjust and re-tighten.
NOTE: When increasing or decreasing the size of your pen, panels must be added or removed
in multiples of two. ADDITIONAL PANELS SOLD SEPARATELY.
ENGLISH
8