Important - Omron M3 Intellisense Manual De Instrucciones

7051_E.book Page 19 Friday, July 15, 2005 4:36 PM
2.
Check the measurement results.
The unit automatically stores blood
pressure and pulse rate into its
memory. Refer to "3.5 Using the
Memory Function".
The buzzer will sound when
measurement is completed.
Notes:
• Self-diagnosis of measured results and treatment are
dangerous. Please follow the instructions of your doctor.
• Wait 2-3 minutes before taking another blood pressure
measurement. Waiting between readings allows the arteries
to return to the condition prior to taking the blood pressure
measurement.

Important:

• If your systolic or diastolic pressure is outside
the standard range, the heartbeat symbol will
blink when the measurement result is
displayed.
Recent research suggests that the following
values can be used as a guide to high blood
pressure for measurements taken at home.
Systolic Blood Pressure
Diastolic Blood Pressure
This criteria is for home blood pressure measurement.
For professional office blood pressure measurement criteria,
please refer to Chapter 9 "Some Useful Information about
Blood Pressure".
Systolic blood
pressure
Diastolic blood
pressure
Pulse display
Above 135 mmHg
Above 85 mmHg
3.Using the Unit
EN
19