Ricoh SP 300 Serie Guía De Inicio página 7

Register by specifying the machine's IP address
1. Print a configuration page from
the machine.
On the multi-function printer
1. Press the [User Tools] key.
2. Press the [
List/Report], and then press the [OK] key.
User Tools
Tray Paper Settings
Network Settings
Print List/Report
3. Press the [
[Configuration Page], and then press the
[OK] key.
4. Press the [OK] key.
The machine prints a configuration page.
On the single-function printer
1. Turn on the machine while pressing the
[Start] key.
2. Release the [Start] key in about 13
seconds.
The machine prints a configuration page.
2. Confirm the Wi-Fi Direct IP
address on the configuration
page.
3. Tap the application icon on
a smart device to start the
application.
4. Tap the search icon (
top right of the screen.
DSG126
] or [ ] key to select [Print
10 10
DSG621
] or [ ] key to select
) on the
5. Tap [Add a machine with IP
Address].
6. Enter the IP address confirmed in
Step 2, and then tap [Connect].
7